shopping_cart Basket | £0.00
Light Duty Mezzanine Goods Lift

Light Duty Mezzanine Goods Lift

SKU: Mezzlite

This is the ideal Mezzanine Goods Lift for lifting up to 250KG. It is more compact than a Heavy Duty Mezzanine Goods Lift meaning the amount of space taken up by the unit is minimal. Mezzanine Goods Lifts are suitable for companies in any industry or warehouse where space can be maximised. Simply load the platform with your goods and raise the platform to the mezz floor. We construct the lift height to suit your requirements, up to a maximum of 3300mm.

POA

 

Download Brochure

Up to 3300mm
250kg
Single Phase
Made in Britain
Full Description
Technical Specification
Product Information

Overview

This is the ideal Mezzanine Goods Lift for lifting up to 250KG. It is more compact than a Heavy Duty Mezzanine Goods Lift meaning the amount of space taken up by the unit is minimal. Mezzanine Goods Lifts are suitable for companies in any industry or warehouse where space can be maximised. Simply load the platform with your goods and raise the platform to the mezz floor. We construct the lift height to suit your requirements, up to a maximum of 3300mm.

POA

  Download Brochure

Description

The light duty mezzanine floor goods lift, is the Goods Only no operator access* lifting solution for utilising space and maximising operation. With its unique modular construction the travel height can be built to order (up to 3300mm), with no ramp required and installation time is reduced.
[*In accordance with EN 1570-1:2011]

The mezzanine meaning, with regards to materials handling, is an additional level above the ground floor to maximise storage and increase floor space. This allows racking and shelving to be erected both under and on a mezzanine floor, doubling the warehouse capacity. Mezzanine floor goods lifts enable a load to be moved from ground floor to the mezz floor at the switch of a button.

The enclosure of the 250 kg mezzanine floor goods lift is 1300mm by 1300mm while the footprint of the goods lift is only 1810mm by 1550mm. It is a self-supporting structure for positioning adjacent to a mezzanine floor and there are no requirements for a pit or ramp.

We are able to fully install the mezzanine lift and allow one day for installation. Other features of the hydraulic goods lift are electrically and mechanically interlocked gates, to prevent opening when the lift is not parked and also to prevent lift motion. A full height wire mesh enclosure to 4 sides with single gate at lower and upper levels to maximise the safe lifting and handling of goods. Furthermore the light duty mezzanine floor goods lift features an ultra-quiet design.

If you wish to discuss how our mezzanine floor goods lifts can benefit your working environment, please contact a member of the team who will be happy to assist you.

  • Maximum lift capacity 250kg uniformly distributed over platform
  • 3300mm maximum lift height (actual height built to order)
  • Lowered platform height 8mm with chamfered leading edge for loading/unloading (no requirement for a pitor ramp)
  • 1300mm x 1300mm useable area on platform
  • One day installation time
  • Ultra quiet
  • Plug & Play
Download Technical Specification

Enclosure

  • Small footprint: 1810mm long x 1550mm wide overall
  • Self supporting structure for positioning adjacent to mezzanine floor
  • Full height wire mesh enclosure to 4 sides with single gate at lower and upper levels
  • Enclosed at upper level
  • Gates electrically and mechanically interlocked to prevent opening when the lift is not parked and also toprevent lift motion
  • Enclosure extending approximately 1300mm above mezzanine floor
  • Access through gate restricted to 1100mm high to prevent operator access

Operation and Power

  • 13 Amp, single phase, 240 Volt power requirements
  • Hold to run (deadman) controls with emergency stop at the lower level
  • Intermittent operation, light duty use i.e. 4 cycles per hour

Colour

  • Platform: Blue RAL 5017 
  • Enclosure: Grey RAL 7037 
Download Specification